Home > Knowledge > Content
Fiberglass geogrid construction precautions
Oct 27, 2017

Fiberglass geogrid pavement should be more smooth, pavement experience after passing, to prevent vertical skew phenomenon.

First by width in the pavement draw a white line or hanging line, you can start paving, and then fixed with a nail grille end (8 per meter width with a nail, uniform distance fixed), fixed grid After the end, with the paving machine will slowly pull the grille forward, each shop 10 meters long artificial tension and straighten a time until a roll of grid finish, and then lay a roll, After a roll with a 6T-10T roller from the starting point to the direction of rolling can be rolled up again, ran zero five three. (Such as paving in the middle layer and leveling layer, with steel roller roller is appropriate; such as grille directly on the concrete pavement, with roller roller is appropriate), then Shop: in the length of the unit as a laying of the length of the section should be covered in the section of the grid covered, and then check the overall quality of a paving, and then paved the next paragraph, the next paragraph paved, the grille and Grille can be used 10-15CM lap length, and with nails or wooden wedge fixed to continue to advance the direction of the second paragraph, and so on, the operation requirements with the former.